Facade AAMA Water Leakage Testing Kit in India

AAMA Testing Kit

Facade Testing by Water Spray in India
The AAMA Water Leakage Testing Kit is used for field checking of Metal Curtain Walls for water leakage in line with Test Specification
Procedure AAMA 501.2-83.

View AAMA Kit Charts and Images

Facade Testing

AAMA Testing Kit importers and suppliers in India
We are the direct importers and suppliers of this fa�ade testing kit which has been developed and manufactured by � monarch mfg works llc, usa � which is called as � AAMA Kit �

AAMA Water Testing Kit in India

View Charts and Images

This Water Testing Kit Comprises of

B � 25, 6.030 W �� FNPT, WATER SPRAY NOZZLE �� GLOBE VALVE,

0 TO 60 PSI PRESSURE GAUGE
WITH A CONNECTION BRASS PIPE

�� GARDEN HOSE ADAPTOR CONNECTION FOR WATER INLET.

WHOLE KIT COMES IN SMALL HARD CARRYING CASE OR A BAG FOR EASE IN HANDLING AND SAFETY

FULLY ASSEMBLED AND READY TO USE AAMA Water Testing Kit in India.

We are importer and supplier of Monarch Products since 1996 - 97 across India.

AAMA Water Testing Kit Used for
Storefront / Curtain Wall Testing
Water Intrusion Testing
Forensic Water Intrusion Testing
Masonry Wall Drainage Testing
Wall Penetration Testing

Fully Assembled And Ready To Use AAMA AAMA Water Leakage Testing Kit in Mumbai, India

We are the direct importers and suppliers of this Facade Testing Kit which has been developed and manufactured by Monarch, USA which is called as �AAMA KIT�

We have been regularly supplying this "AAMA Kit" to many contractors and associated people in this Facade Field across India.

We would request to you to please send to us your enquiries for the same so that we can send to you more details and our commercial offer for the same.

For any questions, you can directly speak to the undersigned, Yogesh Ganatra, Jai Prakash or Nita Ganatra, We shall be promptly providing to you all the requested details by email or phone.

The AAMA Water Leakage Testing Kit is used for field checking of Metal Curtain Walls, Storefront / Curtain Wall Testing, Water Intrusion Testing, Forensic Water Intrusion Testing, Masonry Wall Drainage Testing, Wall Penetration Testing for water leakage in line with Test Specification Procedure AAMA 501.2-83.

AAMA KIT Water test kit includes:
(1) B-25 6.030 W/1/2″ FNPT
(1) 3/4″ Globe valve
(1) 3/4″ Garden hose adaptor
(1) 0-60 PSI Pressure gauge
(1) Case Fully assembled and ready to use!

The Kit is supplied in �1 piece� and each one is individually tested.
Note: When carrying out the test increase water pressure slowly to prevent damaging the Pressure Gauge

Brief Test Procedure (AAAMA 501.2-83)

Monarch AAMA Kit in India

1) An area will be specified for test, 2 bays in width and 2 stones in height. The Test Area should include all types of horizontal and vertical expansion joints or other conditions on a wall where leakage may occur. Any leakage will be checked from the �indoor� side.

2) Working from the exterior, the wall test section shall be selectively wetted progressing from the lowest horizontal joint upwards ensuring vertical joints are wetted also.

3) With the water directed at the joint at a Pressure of 30-35psi (approx 2-2.4 bar) the nozzle should be moved slowly back and forth at a distance of 0.3m from it for a period of 5 minutes for 1.5m of joint. While this is taking place an observer needs to check for leaks on the inside using a flashlight if necessary.

4) If no leakage occurs then the next 1.5m is wetted for 5minutes and so on until the entire test area is covered.

5) If leakage does occur the area needs to be identified, �re-worked� and allowed to dry and then re-tested.

We are Leading Importers, Distributors and Stockies Since 1996 - 97 across India View All Products

Office Address

Bank Details



BANK OF BARODA A/C Name : Yash Hitech Systems Current Account No : 04270200000739 Branch: Majiwade, Thane Branch RTGS / IFSC CODE : BARB0MAJIWA ( PLS NOTE MIDDLE IS DIGIT ZERO AND NOT �O� ) MICR CODE : 400012077

Our Website links : :